Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in Norwalk: What to Know First

We repair and replace Olympia Chimney caps and crowns throughout Norwalk, CT, usually within the same week you call. A standard cap replacement on an Olympia Chimney flue runs $275-$475, while crown repair or coating typically lands between $350 and $650 depending on damage. Every job starts with a camera inspection and a straight answer on what actually needs doing, and the price we quote before work begins is the price on the invoice.

Call (475) 375-2748

If you own a home in Norwalk with an Olympia Chimney product on the roof, this page covers what fails on their caps and crowns, what it costs to fix, and why we handle these jobs the way we do. Call (475) 375-2748 and you’ll get a live person, not a call tree.

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia Chimney galvanized caps corrode at the mesh seam. The standard Olympia Chimney cap uses a galvanized body with a mesh screen. In Norwalk, salt air off Long Island Sound, combined with wet Connecticut winters, eats through the seam where the mesh meets the cap frame. We see this every fall in East Norwalk and Rowayton, and the fix is a replacement with a heavier-gauge cap, not a patch job that buys you six months.
• Crown cracking on Olympia Chimney masonry flue terminations. The crown is the concrete slab that seals the top of the chimney around the flue. On Olympia Chimney installations with masonry terminations, we find hairline cracks widening every freeze-thaw cycle. Water gets in, freezes, and spalls the crown surface. If caught early, we clean, fill, and coat with a flexible crown sealer. If it’s gone too far, we form and pour a new crown with a proper drip edge and expansion joint around the flue tile, which most original Norwalk installs never had.
• Olympia Chimney stainless steel caps loosen on the flue collar. Olympia’s stainless caps come with a pressure-fit collar and set screws. After a few seasons of thermal expansion and contraction, those screws back off and the cap begins to rattle in the wind, or worse, lift off. We replace worn set screws with stainless hardware coated in anti-seize, and we add adhesive where the crown is sound enough to accept it. If the flue tile itself is chipped or out of round, we’ll tell you before we order anything.
• Delaminating pre-cast crowns on factory-built Olympia Chimney units. Olympia Chimney builds pre-fab fireplaces where the cap and crown are integrated into the chase termination. The crown material on some of their older factory-built units separates at the lamination seams. You’ll see bubbling or peeling on the crown surface from the ground. That lets water wick down into the chase, and in Norwalk, that means rusted chase covers and damp insulation. We repair these with a crown coat system, and if the underlying cap is compromised, we install a custom cap that fits the unit’s chase pan.
• Snow and ice damage to Olympia Chimney multi-flue caps. Norwalk gets real snow, and ice dams on the roof can slide into the cap and knock it off or bend the frame. Olympic Chimney multi-flue caps are sturdy but not snowplow-proof. If yours is dented or sprung, we replace it with a cap sized correctly to your flue array, and we check the surrounding roof flashing at no extra charge while we’re up there.

Our Olympia Chimney Chimney Cap & Crown Process

1. 1
   Call and talk to a person. You’ll reach Wendell or one of his crew. We’ll ask what you’re seeing, what the chimney serves, and when you last had a sweep. We set a real arrival window.
2. 2
   We inspect from the roof, not the driveway. A ladder goes up, and we look at the cap, the crown, the flue tile, and the chase. Every inspection includes camera footage of what’s actually up there.
3. 3
   We show you the video before we recommend anything. If the cap is salvageable, we’ll say so. If the crown needs coating, you’ll see the cracks. Nothing gets sold off a guess.
4. 4
   Parts decision: OEM when it matters, quality aftermarket when it doesn’t. For Olympia Chimney factory-built units, we stay with parts that preserve the unit’s UL listing. For standard cap replacements, we’ll offer options, including heavier-gauge stainless that outlasts what was originally installed.
5. 5
   The repair. Caps get correctly sized and mechanically fastened or adhered. Crowns get cleaned, repaired, and sealed with proper expansion joints and drip edges. We clean up every scrap before we leave.
6. 6
   The test and the guarantee. We run water over the repaired surface to confirm it sheds properly, then we walk you through what was done. Every job carries our 90-Day Done Right Promise in writing.

What Olympia Chimney Chimney Cap & Crown Costs in Norwalk

Most Olympia Chimney cap and crown work in Norwalk falls into these ranges:

• Olympia Chimney cap replacement: $275-$475, including the cap, installation, and a quick crown evaluation.
• Custom cap for odd-sized or multi-flue installations: $500-$850, depending on flue count and material.
• Crown crack fill and seal: $180-$320 per crown.
• Full crown replace with form and pour: $650-$1,200, depending on chimney size and access.
• Crown coating system (all crowns): $350-$650.

What moves the price is access, chimney height, and whether the previous installation left you with sound surfaces to work from. We give you the number up front before a single tool comes off the truck. Call (475) 375-2748 for a free estimate, and remember: seniors and veterans always get 10% off.

Why Norwalk Homeowners Call Top Hat Chimney for Olympia Chimney Work

Wendell Pike founded Top Hat Chimney in 1999 and has been on Norwalk roofs ever since, including plenty of afternoons poking at caps in East Norwalk and along the shoreline. We’re an independent Olympia Chimney service provider, not a factory affiliate, which means our loyalty is to the homeowner, not a parts list. When Olympia product has a known weak spot, we’ll tell you. When a competitor’s estimate recommends work that isn’t needed, we’ll show you the camera footage and let you decide.

We also service DuraFlex, HeatShield, and Gelco products, so when a chimney has mixed-maker parts, we’re not stumped or ordering blind. Calls are answered by a live person around the clock. Technicians are background-checked and arrive in uniform with a real arrival window. And every job gets the 90-Day Done Right Promise, in writing, with Wendell’s name on it.

FAQs